Galvanized and Powder-Coated Steel Picket Fence Panels: A Distributor Specification Guide

Aug.07.2026

How to define steel grade, panel size, tube walls, pickets, rails, posts, coating, gates, accessories and export packing

Meta title	Galvanized Powder-Coated Steel Picket Fence Guide
Meta description	Specify galvanized and powder-coated steel picket fence panels using grade, dimensions, tube walls, posts, coating, gates and packing.
Suggested slug	/galvanized-powder-coated-steel-picket-fence-guide/
Primary keyword	galvanized powder coated steel picket fence panels
Supporting keywords	steel fence panels wholesale; Q195 Q235 steel fence; steel picket fence manufacturer China

Article copy

Steel picket fence quotations should define the tubular system rather than only the panel height and colour. Steel grade, picket/rail/post sections, wall thickness, spacing, connection detail, galvanizing and powder coating all affect the product and its export weight.

MaiFa Fence publishes one galvanized steel picket family using Q195 or Q235 steel, wall options of 0.8/1.2/1.5/2.0 mm, heights from 900 to 2500 mm and lengths from 1200 to 2400 mm. It also lists several picket, rail and post sections, galvanized-plus-powder-coated finish and a set of connection accessories.

Quotation rule: select one grade, section and wall for every component. A list of options is not a finished specification, and the thickest value should not be assumed to apply to the whole panel.

A distributor quotation should separate the decorative panel from the complete installed system. List panel height and length, picket section and spacing, rail section, post type, brackets, fasteners, caps and every gate. If more than one design is ordered, give each assembly its own part number and drawing revision. State whether galvanizing occurs before or after fabrication, then define the powder-coating colour and inspection requirements for the selected route. Packing should protect finished surfaces and projecting picket tops while keeping small hardware traceable. With these fields controlled, MaiFa can quote its published steel-fence options without turning a catalogue range into an unsupported claim about the exact order.

1. Convert the published range into a panel schedule

Item	MaiFa published option	Buyer selection
Steel	Galvanized Q195 or Q235	Select grade and required material evidence.
Wall/thickness	0.8, 1.2, 1.5 or 2.0 mm	Assign to each relevant tube/component.
Panel height	900 to 2500 mm	Select finished height and tolerance.
Panel length	1200 to 2400 mm	Select finished length and post centres.
Picket	16 x 16, 19 x 19 or 25 x 25 mm	Select section, wall and spacing.
Rail	30 x 30, 35 x 35, 40 x 40 or 50 x 50 mm	Select section, wall and rail count.
Post	50 x 50, 60 x 60 or 65 x 65 mm	Select section, wall, length and cap.

2. Define picket spacing and top profile

State clear spacing, picket orientation, top style, rail count and rail position. These dimensions affect appearance, containment, climbability and local safety rules. If the fence is for a pool, school or public area, the buyer must identify the applicable local opening and gate requirements rather than relying on a generic product photo.

3. Specify the duplex finish

MaiFa lists galvanized and powder-coated surface treatment. Ask for the fabrication/galvanizing/coating sequence, zinc measurement basis, pretreatment, powder type/thickness, colour, gloss, inspection and repair rule. Pay special attention to welds, drainage holes, cut ends, post bases and field-drilled areas.

Confirm whether components are galvanized before or after fabrication.
State the colour reference and approve a sample if appearance is critical.
Use compatible brackets, bolts, nuts and anti-theft screws.
Define touch-up for transport and installation damage.
Avoid fixed lifetime claims without exposure and maintenance evidence.

4. Include posts, brackets and gates

MaiFa's page describes posts, brackets, bolts, nuts and anti-theft screws as provided accessories for the published product. The quotation should still show their exact quantities and specifications. Single, double and sliding gates should be itemised with clear openings, frames, pickets, posts, hinges, locks, stops, wheels/tracks or automation interfaces.

5. Packing and distributor QA

MaiFa describes bubble film between pieces, iron pallets, strapping, plastic wrapping and corner protection, with wooden-box packing as another option. The buyer should select the packing method, specify protection at picket tops and coating contact points, and request pallet quantities, dimensions, weights and container plan.

6. Quotation checklist

Section	Required detail
Panels	Grade, dimensions, pickets/rails/walls/spacing, welds, tolerance and finish.
Posts/connections	Post section/wall/length, caps, brackets, bolts/nuts/screws and foundation interface.
Gates	Clear opening, frame/pickets, posts, hardware, lock/automation and supports.
QA	Approved drawings/sample, requested material/coating records and dimensional/weld/assembly checks.
Packing	Separators, pallet/crate method, protection, quantities, dimensions, weights and loading plan.
Commercial	Unit/set definition, option prices, Incoterm, named place, schedule, payment and warranty scope.

7. Copy-and-send RFQ

Please quote galvanized and powder-coated steel picket fence panels for [project/market]. Panel height [mm], length [mm], total quantity [panels/m]. State Q195 or Q235 grade; picket, rail and post sections/walls; picket spacing; rail count/position; brackets and fasteners; post/foundation interface; galvanizing and powder-coating sequence, thickness/mass basis, colour and gloss. Itemise gates and spares. Include approved drawings/sample, requested QA records, pallet/crate packing, weights, container plan and [Incoterm] price to [named place].

Frequently asked questions

Which steel grades does MaiFa publish?

Q195 or Q235 for the referenced galvanized steel product family.

Are all components 2.0 mm thick?

No. The page lists multiple thickness options. Assign the selected wall to each component.

What accessories are listed?

Posts, brackets, bolts, nuts and anti-theft screws; the quotation should specify them.

Can packing be customised?

The page describes iron-pallet and wooden-box approaches. Confirm the selected method and package data.

Request a component-level MaiFa steel fence quotation

MaiFa can quote a selected panel, post, bracket, finish and gate configuration from its published range. Component-level details make repeat orders and supplier comparisons more reliable.

Open MaiFa's galvanized steel fence product page.