6 ft x 9.5 ft Canada Temporary Fence Panels: A Specification Guide for Wholesale Buyers

Aug.06.2026

How to define welded mesh panels, square-tube frames, flat feet, top couplers, gates, coatings and export packing

Meta title	6x9.5 Canada Temporary Fence Panel Specification
Meta description	Specify 6 ft x 9.5 ft Canada temporary fence panels, frames, mesh, flat feet, top couplers, gates, coatings and packing.
Suggested slug	/6x9-5-canada-temporary-fence-panel-specification/
Primary keyword	6x9.5 temporary fence panels Canada
Supporting keywords	Canada construction fence panels wholesale; temporary fence flat feet; P shaped top coupler

Article copy

The 6 ft x 9.5 ft size is a common commercial search for Canada-style temporary fence panels, but the outside dimensions alone do not define the product. Wire, mesh, frame tube, rail tube, feet, couplers, coating, gates and packing must be stated before supplier quotations can be compared.

MaiFa Fence's current product table lists 4 ft, 6 ft and 8 ft heights with a 9.5 ft width, 3.0/3.5/4.0 mm wire, 50 x 100 mm welded mesh, square-tube frame and rail options, top clips and base plates. Buyers should choose from these options and confirm the final drawing.

Specification rule: write the finished outside panel size and tolerance. MaiFa's category page also shows other commercial sizes, so a product title or photo is not a substitute for an approved drawing.

1. Select the panel configuration

Item	MaiFa published option	Buyer decision
Height	4 ft, 6 ft or 8 ft	Select 6 ft finished height for this specification.
Width	9.5 ft	Confirm outside width and tolerance.
Wire	3.0, 3.5 or 4.0 mm	Select one diameter and tolerance.
Mesh	50 x 100 mm, with other options indicated	State exact opening and orientation.
Frame	25 x 25 or 30 x 30 mm square tube	Add wall thickness and corner detail.
Horizontal rail	20 x 20, 25 x 25 or 30 x 30 mm	Select section and wall thickness.
Finish	Epoxy polyester powder coating or PVC coating; multiple colours	State system, colour reference and inspection.

2. Add missing tube-wall and tolerance information

MaiFa's product table lists tube outside sections but does not state their wall thickness. The RFQ should therefore request frame and horizontal-rail wall thickness separately. Also define panel squareness, straightness, finished outside dimensions, weld coverage and how exposed cut or welded areas are protected after fabrication.

If the panels must integrate with an existing rental fleet, supply measured coupler and foot interfaces, photos or a reference sample. Small differences in frame size, corner construction or foot socket location can prevent interchangeability even when both products are marketed as 6 x 9.5 ft.

3. Specify flat feet and P-shaped top couplers

MaiFa describes Canada-style panels as using plate-type feet and a P-shaped top coupler; its table calls them base plates and top clips. The quotation should connect these terms to a drawing. For the foot, state plate length/width/thickness, sockets, hole pattern, welds, mass and finish. For the coupler, state formed dimensions, material thickness, bolt/nut and finish.

Itemise one installed quantity and one buyer-approved spare quantity.
Confirm whether feet and couplers are included in the panel set or priced separately.
Keep bolt, nut and washer sets together in labelled cartons.
State whether gate wheels or converted-panel gate hardware are included.

4. Define gates, screening and supports

MaiFa says small gates can be customised. State the clear opening, overall frame, infill, hinges, latch, wheel/support and connection to adjacent panels. If privacy screen or printed mesh will be attached, disclose its coverage because it changes wind resistance. The site team should verify the actual support arrangement for the layout and exposure.

5. Wholesale quotation schedule

Section	Information to show
Panels	Quantity, 6 ft x 9.5 ft outside size, tubes/walls, wire, mesh, welds, coating, colour and tolerance.
Accessories	Foot and top-coupler drawings, fasteners, quantities and spares.
Gates/supports	Clear openings, hardware, braces/counterweights if selected and complete BOM.
QA	Approved drawing, dimensional/weld/coating inspection and pre-shipment photos.
Packing	Panels per stillage, feet/couplers per package, weights, dimensions and container plan.
Commercial	Unit prices, MOQ if applicable, Incoterm, named place, schedule, payment and warranty scope.

6. Copy-and-send RFQ

Please quote [quantity] Canada-style temporary fence panels, finished outside size 6 ft high x 9.5 ft wide. State frame tube and wall, horizontal rail and wall, wire diameter, 50 x 100 mm mesh details, coating system, colour and tolerances. Itemise flat base plates, P-shaped top couplers, bolts/nuts, spares, [gate schedule] and any selected support components. Provide drawings, inspection records requested, stillage/packing quantities, package weights, container plan and [Incoterm] price to [named place].

Frequently asked questions

Does MaiFa publish 6 x 9.5 ft panels?

Yes. Its table lists 6 ft among the heights and 9.5 ft width. Confirm final outside dimensions.

Is tube wall thickness published in the same table?

No. Ask the quotation to state frame and rail wall thicknesses.

What are the main Canada-style accessories?

MaiFa identifies flat plate-type feet/base plates and P-shaped top clips/couplers.

Can panels be colour customised?

Several colours are published. State a precise colour reference and coating system.

Ask MaiFa for an approved 6 x 9.5 ft assembly drawing

MaiFa can quote the panel, feet, top couplers and customised gates when the selected tube, mesh, coating and packing requirements are clear. The approved assembly drawing should control production and future repeat orders.

Open MaiFa's Canada-style product page. View the Canada Temporary Fence category.